Latest MegaDrum schematics. 32 inputs.

Discussions related to MegaDrum Hardware

Re: Latest MegaDrum32 schematics. 32 inputs.

Postby dmitri » Mon Jul 21, 2008 3:59 pm

And for those who wonders why I switched from DipTrace to KiCad - the main reason is that KiCad doesn't place components/nodes number on a board limit compared to a free version of DipTrace.
And of course a nice 3d preview of a board with components like shown below:)

Digital Board:
digital_board_3d.png

Analogue Board:
analogue_board_3d.png
You do not have the required permissions to view the files attached to this post.
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: Latest MegaDrum32 schematics. 32 inputs.

Postby andrex289 » Wed Jul 30, 2008 4:43 am

Hi dmitri, i think there is something wrong with digital and analog board schematics. The 15th and 16th pins from analogue connector are wired to ground and vcc respectively on both boards... I think these pins just dont do anything, does they?
andrex289
 
Posts: 12
Joined: Thu Jun 05, 2008 2:05 pm

Re: Latest MegaDrum32 schematics. 32 inputs.

Postby dmitri » Wed Jul 30, 2008 9:09 am

They do. They're connected to ground and Vcc. ICs and other parts pick up ground and Vcc from them.
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Postby CairnsFella » Tue Aug 12, 2008 7:21 am

Ok all.. accepting that I am pretty dumb on such matters, I am having problems re the keyboard (button) connectors.

On the schematic, it shows two different connections for the encoders and keyboards. On my (or rather "synthex's" rather excellent) board, I see only the keyboard connector.. BUT, this has 5 pins rather than the schematics 4 ?? I seem to be able to get the buttons to function using pin 5 as the "common connector" (I dont know what the technical term is) but as this doesnt appear to be as per the schematic, I didnt want to pursue this for fear of breaking something....

On a slightly different note, many thanks to synthex, the board is great and.. so far (having connected one piezo to the pins and the board via usb to my pc... it seems to be fully functional :o :mrgreen:

This is despite my almost wrecking the board thinking I had several shorts on the lcd connector, and aggressivly scraping at the solder, only to find that they are meant to be connected :?

Thanks for any help received.
CairnsFella
 
Posts: 26
Joined: Wed Jul 09, 2008 2:34 am

Re: Latest MegaDrum32 schematics. 32 inputs.

Postby Synthex » Tue Aug 12, 2008 9:08 am

Synthex
 
Posts: 1471
Joined: Fri Oct 12, 2007 6:06 am
Location: France

Re: Latest MegaDrum32 schematics. 32 inputs.

Postby CairnsFella » Fri Aug 15, 2008 8:38 am

Thanks,

Thank second link ties in with what I "discovered" to work.. but I would say that there is info on the site that contradicts.. maybe its for a different set up.. I'm not that "up with electronic" to know for sure, but it is confusing. I cant remember where it was posted, but it only uses for pins for the keyboard and shows the use of diodes on pin 4.

Anyway. no matter, as I am back on track.

Thanks again.
CairnsFella
 
Posts: 26
Joined: Wed Jul 09, 2008 2:34 am

Re: Latest MegaDrum32 schematics. 32 inputs.

Postby jamalpiper » Tue Sep 02, 2008 4:44 pm

I have a question about the programming cables, Is it at all possible to program the Atmega from a a 9pin COM port? My computer only has that style.

Schematics would help if its possible.
-[K]
jamalpiper
 
Posts: 79
Joined: Wed Aug 06, 2008 11:05 pm
Location: CA, USA

Re: Latest MegaDrum32 schematics. 32 inputs.

Postby dmitri » Tue Sep 02, 2008 7:24 pm

jamalpiper wrote:I have a question about the programming cables, Is it at all possible to program the Atmega from a a 9pin COM port? My computer only has that style.

Schematics would help if its possible.

As far as I know it is not possible.
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: Latest MegaDrum32 schematics. 32 inputs.

Postby horkam » Wed Sep 03, 2008 5:55 pm

First of all, this info is absolutely wonderful.

Secondly, can I assume that wattages and voltages on the resistors and capacitors can fluctuate quite a bit or should I stick with specific ones like 1/4 watt resistors and 50vdc caps? Reason I ask is that everywhere I go and search for the parts, I get several of each type with differing voltage or wattage ratings and I get a tad confused :oops:

Lastly, regarding the resistors that you list as 4k7 and 3k3 etc. Can I read that as 4.7k and 3.3k?
horkam
 
Posts: 1
Joined: Tue Sep 02, 2008 4:57 pm

Re: Latest MegaDrum32 schematics. 32 inputs.

Postby Synthex » Wed Sep 03, 2008 6:43 pm

horkam wrote:First of all, this info is absolutely wonderful.

Secondly, can I assume that wattages and voltages on the resistors and capacitors can fluctuate quite a bit or should I stick with specific ones like 1/4 watt resistors and 50vdc caps? Reason I ask is that everywhere I go and search for the parts, I get several of each type with differing voltage or wattage ratings and I get a tad confused :oops:

Lastly, regarding the resistors that you list as 4k7 and 3k3 etc. Can I read that as 4.7k and 3.3k?

You can use 1/4 or 1/2 watt resistors and more than 10vdc caps.
Yes, 4k7 = 4.7k and 3k3 = 3.3k
Synthex
 
Posts: 1471
Joined: Fri Oct 12, 2007 6:06 am
Location: France

PreviousNext

Return to MegaDrum Hardware

Who is online

Users browsing this forum: No registered users and 21 guests

cron